VESSELS / VALVES
The CK-5 gas-powered suction stop valve provides the normal operating features of the R/S CK-2 suction stop valve and features a built-in failsafe to close the valve until pressure is equalized in the event of a power loss.
These valves are piston-type, gas powered, and normally open. They are heavy duty, semi-steel bodied valves that are built with control precision. The 32mm (1-1/4”) port size has a PTFE main seat, the 40mm (1-5/8”) port and larger have a metal to metal seat, the 100mm and 125mm (5” and 6”) port size versions of this unique suction stop valve utilize a larger capacity, remotely piped pilot operated solenoid, the R/S type S8F. In addition, the pilot regulator for these two larger sized valves is mounted on top of valve, with the strainer disc assembly piped into the side of the adapter.
• Industrial Refrigeration
• Commercial Refrigeration
Features and Benefits:
• Normally Open
• Features a pilot regulator to ensure pressure equalization in the event of a power loss
• Low Pressure Drop
• Manual Opening Stem
• Integrated Pilot Solenoid on 32mm to 100mm (1-1/4” to 4”) Sizes
• Use in Vertical or Horizontal Line
• Valve may be mounted on its side
• Design Pressure (MRP): 27.6 bar (400 psig)
• Requires lubricant-free pilot flow at evaporator temperatures below -25°F(-30°C)
• Hot Gas Defrost
• Suction Stop Valve
MINIMUM WORKING TEMPERATURE (C)
MINIMUM WORKING TEMPERATURE (F)
MAXIMUM WORKING TEMPERATURE (C)
MAXIMUM WORKING TEMPERATURE (F)
MAXIMUM RATED PRESSURE (BAR)
27.6bar or 28bar
MAXIMUM RATED PRESSURE (PSIG)
400psig or 406psig
PORT SIZE (MM)
32mm to 150mm
PORT SIZE (INCH)
1-1/4" to 6"
S6B, S6A, No Solenoid Type
PILOT FLANGE TYPE
FPT or Socket Weld
PILOT CONNECTION SIZE (INCH)
3/8" to 3/4"
No Flange, Socket Weld, ODS, Weld Neck
None or 1-1/4" to 6"
Please Configure Part for Coil Type Specification
Standard Valve Material or Meets Pressure Equipment Directive (PED)