800-624-3393

  •    Downloads

     

     

     

s9a stop valve clark johnson co

Refrigerant Check and Isolation Valves

 

Gas Powered Suction Stop Valve- S9A-S9W

parker refrigeration Clark Johnson Co

The S9A and S9W valves are designed to promptly and fully open or close under conditions which make conventional solenoid valves unreliable or unsuitable. The S9 requires no minimum pressure drop to open which makes it ideal for certain applications.

 

  Product Overview

     Specification

The S9A and S9W are heavy-duty gas powered valves suitable for ammonia and other refrigerants, certain oils and other fluids approved for use in refrigeration. They are pilot operated semi-steel bodied valves. The valves may be opened by means of the manual opening stem for servicing or in case of electrical power failure. The Type S9A and S9W are pilot operated valves but uses an external source of higher pressure gas to operate the valve, and, therefore requires no minimum pressure drop to open. The external gas pressure for the Type S9A must be at least 0.69 bar (10 psi), and 0.71 bar (10 psi) for the S9W, above valve internal upstream pressure for positive opening. This valve is normally closed. They are two-position valves using condenser gas pressure acting upon a piston for opening, and a strong spring for closing. A lapped seat at the top of the piston prevents the condenser gas from leaking around the piston to the compressor suction side of the valve. A twin Pilot Solenoid Valve assembly serves to admit condenser gas pressure to the piston for opening and to bleed this gas pressure to the suction line for valve closing. A single-pole, double throw thermostat or relay may be used to control these two Pilot Solenoid Valves.

 

Markets:

• Industrial Refrigeration

• Commercial Refrigeration

 

Features and Benefits:

• Low Pressure Drop for Low Temperature Operation

• Suitable to -50°C (-60°F)

• Can Be Installed in Vertical or Horizontal Position

• Manual Opening Feature

• Maximum Rated Pressure (MRP) 27.6 bar (400 PSIG)

• Requires no minimum pressure drop to open

 

Application:

• Use in viscous oil conditions

• Vertical pipelines

• Where very low pressure drop is required

 

MINIMUM OPERATING TEMPERATURE (C)

-50°

 

MINIMUM OPERATING TEMPERATURE (F)

-60°F

 

MAXIMUM OPERATING TEMPERATURE (C)

105°C

 

MAXIMUM OPERATING TEMPERATURE (F)

220°F

 

MAXIMUM PRESSURE (BAR)

27.6bar

 

MAXIMUM PRESSURE (PSIG)

400psig

 

FLOW COEFFICIENT (KV)

39 Kv to 471 Kv

 

FLOW COEFFICIENT (CV)

45 Cv to 550 Cv

 

VALVE TYPE

S9A, S9W

 

PORT SIZE (MM)

50mm to 200mm

 

PORT SIZE (INCH)

2" to 8"

 

PILOT FLANGE TYPE

FPT or Socket Weld

 

PILOT CONNECTION SIZE (INCH)

3/8" to

 

STRAINER TYPE

Without Strainer or With Strainer

 

FLANGE TYPE

Socket Weld, Weld Neck, No Flange

 

CONNECTION SIZE

None or 1-1/2" to 4"

 

VALVE MATERIAL

Standard Valve Material

 

PLATING

No Plating

 

BODY STYLE

Standard or Weld In

 

BODY MATERIAL

Gray Iron

 

SEAT MATERIAL

Metal

Clark Johnson Company, Inc.       2016