800-624-3393

sstlb evaporator evapco clark johnson co

INDUSTRIAL EVAPORATORS

SSTLB Product Coolers

Designed for larger industrial product coolers in low, medium and high temperature applications. These models utilize axial fans and have advanced features such as:

 

  • One to Four Fan Models
  • Sloped Top Panels
  • Cast Aluminum Fans
  • Dual Sloped Drain Pans
  • Certified Performance in Accordance AHRI Std 420

Design Features

Maintenance Features

Optional Equipment

Unit Specification

SSTLB Product Coolers - Design Features

 

SSTLA evaporators are equipped with owner-oriented benefits that solve many operational problems end users have experienced with traditional evaporators. Cleanability, good maintenance access and a safe working environment are important concerns of most end-users. EVAPCO has designed the SSTLA Evaporator to address all of these issues.

SSTLB Product Coolers - Maintenance Features

SSTLB Product Coolers - Optional Equipment

STL Series Evaporators

 

Large Unit Coolers and Product Freezers

 

Innovative Design Features with Superior Quality, Performance and Dependability

 

Large Unit Coolers for Freezer and Cooler Applications Requiring Low to Medium Room Temperatures. SSTL Models Combine High Capacity with Maintenance Friendly Features for the Best Value. SSTL Evaporators are Only Available with Stainless Steel Tube and Aluminum Fins.

Design Features

 

Heavy Duty Coil with Stainless Steel Tube and Aluminum Fin. Standard Catalog Models with Three or Four Fins per Inch, Variable Fin Spacing Available as an option.

 

Coil Built in Accordance with ASME/ANSI B31.5. Charged With Nitrogen Prior to Shipment to Prevent Entry of Moisture and Contamination. Pressure Tested Under Water to 400 PSIG.

 

Heavy Gauge G-235 Galvanized Steel Housing for Superior Corrosion Resistance and Longer Life (2.5 Times the Zinc Protection of Other Manufacturers). Optional Stainless Steel Pan and/or Casing for Critical Process Environments.

 

Heavy Duty PVC Coated Fan Screens conform to all OSHA Requirements. Heavy Duty Cast Aluminum Fan Blades for Increased Performance and Durability. Totally Enclosed Air Over (TEAO) Fan Motors with Sealed Bearings and Low Temperature Grease for Reduced Maintenance and Longer Life. Fan Motors on Catalog Models up to 1-1/2 HP are Equipped with Automatic Thermal Overload Protection.

 

Individually Wired Fan Motors to NEMA 4 Junction Boxes. Motors may be Supplied with Disconnects and/or Starters.

 

Sloped Top Panels to Prevent Moisture from Accumulating on the Top of the Unit. Water from the Top of the Unit will Drain into the Over-sized Drain Pan, Improving the Cleanliness of the Unit and Preventing the Possibility of Product Contamination.

 

Fully Accessible, Hygienic Drain Pans are Sloped in Two Directions to Prevent Water from Pooling in the Pan. The Drain Pans are Custom Engineered and Equipped with Swaged Bottom Outlets to Ensure Complete Drainage. Wet Coil Baffles Installed in the Middle of the Coil to Prevent Air Bypass and Allow for Drain Pan Access from Both Side of the Coil.

 

Hot Dip Galvanized Structural Steel Legs are Designed for Platform Mounting and are Removable for Ceiling Mounting.

 

Superior Defrost Technology with Optional Water Defrost, Electric Defrost and Hot Gas Defrost Arrangements Available. Optional Hot Gas Defrost Pan Includes Closely-Spaced, Heavy Wall Pan Coil. Hot Gas Pan Coil may be Piped either in Parallel or in Series with Cooling Coil. Factory Mounted Piping with Pan-to-Coil Check Valve.

Innovative New Technology

 

Coil Design Developed Through Extensive Testing at EVAPCO's Advanced Research and Development Laboratory and Industry Experience.

 

    Thermal Performance Guaranteed.

    Optimized Coil Circuiting for Increased Performance.

    Clean Tube and Fin Pattern Ideal for Food Freezing Applications.

 

Proven Performance Resulting In:

 

    Lower Horsepower

    Greater Capacity

    Hygienic Design

 

Hot Dip Galvanized Structural Steel Legs are Designed for Greater Structural Rigidity and Easier Installation. STM Models Ship with Sheet Metal Channels that Allow the Unit to be Easily Handled with a Forklift. Once the Unit is Installed, the Shipping Supports are Easily Removed.

 

Superior Defrost Technology with Optional Water Defrost, Electric Defrost and Hot Gas Defrost Arrangements Available. Optional Hot Gas Defrost Pan Includes Closely-Spaced, Heavy Wall Pan Coil. Hot Gas Pan Coil may be Piped either in Parallel or in Series with Cooling Coil. Factory Mounted Piping with Pan-to-Coil Check Valve.

Innovative New Technology

 

Coil Design Developed Through Extensive Testing at EVAPCO's Advanced Research and Development Laboratory and Industry Experience.

 

  • Thermal Performance Guaranteed.
  • Optimized Coil Circuiting for Increased Performance.
  • Clean Tube and Fin Pattern Ideal for Food Freezing Applications.

 

Proven Performance Resulting In:

 

  • Lower Horsepower
  • Greater Capacity
  • Hygienic Design

Clark Johnson Company, Inc.       2016